Release Notes for AviPLAN Turn
2.3.1
This document describes the notable changes made to AviPLAN Turn since version 1.0.
[A] AutoCAD® specific
[M] Bentley/MicroStation® specific
[B] BricsCAD® specific
2.3.1
Software Update | Released 10 July 2019
Includes bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 17 May 2019.
Note: Drawings written by this version cannot be opened with a version older than 2.3.0!
Corrected/Changed functionality
Microstation V8i crashes
Random crashes and hangs when AviPLAN Turn was used on Microstation V8i.
Regression in version 2.3.0
General
Design Path
Ortho is now turned off when inserting the object at start of the path command.
Creating a path for a combination with more that one trailer, e.g. luggage train, could, under circumstances, be difficult to complete.
Regression in version 2.3.0
Installation
Microstation configuration file wasn't always created for a new installation.
Regression in version 2.3.0
MSI install/uninstall did not work on Windows 10.
Prerequisite installation files, for the workstations, are now copied to the Workstation folder during a network installation. See the PrerequisitesReadMe.txt file, also copied to the folder, for more information
2.3
Software Upgrade | Released 17 May 2019
Includes new CAD platform compatibility, new functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 17 May 2019.
Note: Drawings written by this version cannot be opened with previous versions!
Platform Compatibility
System Requirements
Workstation: Windows® Vista SP2, Windows 7 SP1, Windows 8/8.1, Windows 10
Server: Windows® Server 2008, 2008 R2, 2012, 2012 R2, 2016
Platform Requirements
Autodesk® AutoCAD® 2010 – 2020 (except AutoCAD LT)
Autodesk® Civil 3D® 2010 – 2020
Bentley® MicroStation® V8i, CONNECT Edition
Bentley® Open Roads Designer® CONNECT Edition
Bentley® MicroStation PowerDraft® V8i, CONNECT Edition
Bentley® PowerCivil® V8i
Bentley® Power GEOPAK® V8i
Bricsys® BricsCAD® (Pro and Platinum) V14 – V19
New/Improved functionality
CAD platform compatibility
Autodesk AutoCAD® 2020
Autodesk Civil 3D® 2020
BricsCAD® V19
Regulations
ICAO Annex 14 Volume 1 Amendment 14 renamed ICAO Annex 14 Volume 1 Eighth Edition.
Select Object
Minimum and maximum data set values now displayed when applying filters.
Design Path
'Turn on spot' is now available for all airplanes (Direct and Oversteer turns only).
Use with caution! May result in excessive stress on landing gears and pavement surfaces.
Algorithm refinements have been made to improve oversteer maneuvers with vehicle combinations.
Algorithm refinements have been made to improve fixed angle turns.
Session Manager
A Layer property control has been added to the 'Pilot's eye' path Element.
A 'Nose gear, center' path Element has been added for wheeled helicopters.
Licensing
Revised license system with enhanced license update and activation capabilities.
General
The feedback given when locked/frozen/off layer/level are used has been refined.
Corrected/Changed functionality
Design Path
Command could become slow to respond in drawings with a lot of layers/levels.
Opening a session with a 'Start Path' segment only could cause a system error.
Session Manager
Applying a template with side-view to airplanes without side-view could cause an error.
General
Numerous errors submitted via the AviPLAN Error Report tool have been corrected.
2.2.1
Software Update | Released 22 November 2018
Includes new functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 12 November 2018.
Note: Drawings written by this version cannot be opened with a version older than 2.2.0!
Corrected/Changed functionality
Session Manager
Dialog content wasn't always updated after a property template was applied.
General
AviPLAN Turn could crash if an user-defined report templates was used.
2.2
Software Upgrade | Released 12 November 2018
Includes new functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 12 November 2018.
Note: Drawings written by this version cannot be opened with previous versions!
Platform Compatibility
System Requirements
Workstation: Windows® Vista SP2, Windows 7 SP1, Windows 8/8.1, Windows 10
Server: Windows® Server 2008, 2008 R2, 2012, 2012 R2, 2016
Platform Requirements
Autodesk® AutoCAD® 2010 – 2019 (except AutoCAD LT)
Autodesk® Civil 3D® 2010 – 2019
Bentley® MicroStation® V8i, CONNECT Edition
Bentley® Open Roads Designer® CONNECT Edition
Bentley® MicroStation PowerDraft® V8i, CONNECT Edition
Bentley® PowerCivil® V8i
Bentley® Power GEOPAK® V8i
Bricsys® BricsCAD® (Pro and Platinum) V14 – V18
New/Improved functionality
Regulations
Various revisions made in accordance with ICAO Annex 14 Volume 1 Amendment 14.
Select Object
Maximum Taxi, Take-Off and Landing Weight (MTW, MTOW and MLW respectively) data has been added, where available.
Tractor towing capacity data has been added, where available.
Design Path
'Turn on spot' functionality has been added for Direct and Oversteer turns with vehicles.
Improved swept surface display for complex paths, e.g. crossing paths.
Algorithm improvements have been made to improve pushback functionality.
Session Manager
A Label property is now available for jet blast contour drawings.
Service Editor
A right-click context menu has been added to move, rotate and/or articulate vehicles from the preview.
Settings
A Weight unit setting has been added.
General
Report customization parameters, for creating user-defined report templates, have been documented in Help.
Corrected/Changed functionality
Design Path
Improved swept surface display for complex paths, e.g. crossing paths.
'Turn on spot' behaved incorrectly when used in conjunction with a locked turn angle.
Park Object
A crash could occur when opening the command if a user-defined property template had been previously set as default.
Session Manager
Object Fill could be erroneously displayed on layer 0/level default, even if the Layer property was set.
Tutorials
Certain tutorial steps and dialog images were outdated.
General
An error would occur if a session was set to use a locked/frozen/off layer/level.
A message is now displayed to warn if a locked/frozen/off layer/level is used.
Numerous errors submitted via the AviPLAN Error Report tool have been corrected.
Migration
An error occurred when opening AviPLAN 1 sessions that included ATR 42 and 72 airplanes with active take off jet blast.
Take off jet blast was removed in library version 2.001.
2.1
Software Upgrade | Released 30 April 2018
Includes new CAD platform compatibility, new functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 30 April 2018.
Note: Drawings written by this version cannot be opened with previous versions!
Platform Compatibility
System Requirements
Workstation: Windows® Vista SP2, Windows 7 SP1, Windows 8/8.1, Windows 10
Server: Windows® Server 2008, 2008 R2, 2012, 2012 R2, 2016
Platform Requirements
Autodesk® AutoCAD® 2010 – 2019 (except AutoCAD LT)
Autodesk® Civil 3D® 2010 – 2019
Bentley® MicroStation® V8i, CONNECT Edition
Bentley® MicroStation PowerDraft® V8i, CONNECT Edition
Bentley® PowerCivil® V8i
Bentley® Power GEOPAK® V8i
Bricsys® BricsCAD® (Pro and Platinum) V14 – V18
New/Improved functionality
CAD platform compatibility
Autodesk AutoCAD® 2019
Autodesk Civil 3D® 2019
Design Path
Algorithm improvements have been made to improve the usability of the Follow function.
Session Manager
Session layer can now be assigned for multiple sessions simultaneously.
Property templates can now be assigned for multiple sessions simultaneously.
A new element has been added for visualizing the 'Engine, inner' path for 4-engine airplanes.
Service Editor
A new 'Service Editor' command has been introduced for creating customized airplane service arrangements.
Vehicle Editor
A new mandatory control has been added under General to define vehicle Type.
Installation
Silent installation is now supported for Standalone/Single User license installations.
Corrected/Changed functionality
Design Path
The Follow function occasionally generated large circles to reach the selected target point.
Following 'joined' line elements could, under certain circumstance, cause a system error.
Session Manager
The FAA ADG III Taxilane Wingtip Clearance value was set by default to 23 feet.
A system error could occur when applying a template with the 80km/h / 35mph Idle thrust impact surface.
Service Arrangement display settings were not retained when reopening sessions.
General
[A] A system error could occur when selecting AviPLAN elements in an AutoCAD drawing after a library update.
Jet blast impact surface boundary lines were jagged, under certain circumstances.
Numerous errors submitted via the AviPLAN Error Report tool have been corrected.
2.0.2
Software Update | Released 22 January 2018
Includes improved functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 19 September 2017.
Note: Drawings written by this version cannot be opened with previous versions!
New/Improved functionality
CAD platform compatibility
Bricsys BricsCAD® V18
Regulations
Various revisions made in accordance with EASA CS-ADR-DSN Issue 4.
Installation
Proceeding with upgrade/update installations is no longer possible if the local MAP doesn't meet validity conditions.
Corrected functionality
General
[A] Opening AutoCAD® Civil 3D drawings in 'Civil 3D as AutoCAD' mode could cause a system error.
[A] Selections made using 'Open Session in Drawing' could, under certain circumstances, cause a system error.
Regression in version 2.0.1.
Activating swept path elements for sessions at extremely large drawing coordinates caused a system error.
Design Path
Removing 'Follow layers' using the in-drawing Ctrl context menu caused a system error.
Settings
When 'Automatic Updates Notification - Check on Startup' was set to No, it would default back to Yes.
2.0.1
Software Update | Released 30 October 2017
Includes improved functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 19 September 2017.
Note: Drawings written by this version cannot be opened with previous versions!
New/Improved functionality
Park Object
The Object tab is always enabled in order to change all objects in a session.
Save As is now available in the Quick Access toolbar.
Design Path
Algorithm improvements have been made to improve calculation and drawing times.
General
A message is now displayed at start-up if drawing data needs to be converted to a newer format.
Corrected functionality
General
[M] Incorrect session data was shown in MicroStation tooltips if a command was not active.
Interface icons were not resized correctly when display scale ≠ 100%.
Design Path
[A] The Follow function did not work with AutoCAD® 2018 external references (xref).
Session Manager
Changes made to the appearance of airplane clearance box fill were not applied.
Installation
Running SetupWorkstation.exe with an explicit path started the installation as a Demo.
Regression in version 2.0.
Rental/Subscription licences were not detected during upgrade installation.
Regression in version 2.0.
2.0
Software Upgrade | Released 21 September 2017
Includes new CAD platform compatibility, new functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 19 September 2017.
Note: Drawings written by this version cannot be opened with previous versions!
Platform Compatibility
System Requirements
Workstation: Windows® Vista SP2, Windows 7 SP1, Windows 8/8.1, Windows 10
Server: Windows® Server 2008, 2008 R2, 2012, 2012 R2, 2016
Platform Requirements
Autodesk® AutoCAD® 2010 – 2018 (except AutoCAD LT)
Autodesk® AutoCAD® Civil 3D 2010 – 2018
Bentley® MicroStation® V8i, CONNECT Edition
Bentley® MicroStation PowerDraft® V8i, CONNECT Edition
Bentley® PowerCivil® V8i
Bentley® Power GEOPAK® V8i
Bricsys® BricsCAD® (Pro and Platinum) V14 – V17
New/Improved functionality
CAD platform compatibility
Autodesk AutoCAD® 2018
Bricsys BricsCAD® V17
All 'Design' commands
A new 'Move' function is available for repositioning sessions.
'Save As and Move' has been replaced by a new 'Copy' function.
Park Object
Several minor interface changes have been made to improve the user experience.
Session Manager
Service Arrangement vehicles can be shown/hidden individually.
A new 'Engines' element is available under Safety Area(s).
Passenger stairs are included in airplane service arrangements.
Multiple rows can be selected and activated at once using Ctrl and/or Shift.
User-defined elements can be defined, tracked and visualized.
Vehicle Editor
Several minor improvements have been made to improve the user experience.
General
Dialogs are scaled automatically on high resolution monitors.
It is possible to register from within the software to receive product news and improved support.
Notifications are now displayed within the software when updates are available for download.
A improved reporting tool has been added for submitting system error files and comments.
Corrected/Changed functionality
System Requirements
The following Windows® versions are no longer supported:
Workstation: Windows® XP, Windows Vista without SP2, Windows 7 without SP1
Server: Windows® Server 2003
Session Manager
Engine suction danger areas were too small in some cases due to a rounding error.
Migration
Simulations migrated from AeroTURN could, under rare circumstances, cause AviPLAN to crash.
Licensing
On rare occasions, network seats were not made available to other users after AviPLAN/CAD was closed.
General
Text fields in certain dialogs were empty in Japanese versions of Windows®.
Non-English characters in report template style names were not handled correctly.
Symbols used in session names were not handled correctly.
An error could occur when creating reports due to the image zoom function.
1.1.2
Software Update | Released 2 February 2017
Includes new CAD platform compatibility, improved functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 15 June 2016.
Note: Drawings written by this version cannot be opened with previous versions!
New/Improved functionality
CAD platform compatibility
Bentley MicroStation® PowerDraft CONNECT Edition.
Bentley Power GEOPAK V8i.
Regulations
Taxiway and taxilane clearance distances adjusted according to ICAO Annex 14 Amendment 13.
Corrected functionality
General
AviPLAN could crash when a network license was checked out if usage reporting was activated.
CAD did not close properly on some Windows versions after using AviPLAN.
Regression in version 1.1.1
[A] Non-English AutoCAD MAP 3D could crash when the AutoCAD move command was used after using an AviPLAN command.
[M] The wrong MicroStation element priority was set for elements in AviPLAN object drawings.
[B] The AviPLAN menu and ribbon wasn't displayed in BricsCAD V16 32-bit.
Design Path
The 'Direct Turn' turn type did not always generate the tightest possible turn, even if indicated as such.
Migration
When migrating PathPlanner 6 Park Sessions, all objects were drawn at the location of the first object.
1.1.1
Software Update | Released 7 October 2016
Includes improved functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 15 June 2016.
New/Improved functionality
CAD platform compatibility
[M] AviPLAN did not work on Bentley PowerCivil® V8i and PowerDraft® V8i products.
Regression in version 1.1
General
A button (Transoft logo symbol) which opens the Support Helpdesk has been added to the menu/ribbon/toolbar.
Corrected functionality
General
A number of stability issues were identified that could impact overall performance.
[M] The AviPLAN user interface was visible even when MicroStation® V8i was launched without AviPLAN running.
Regression in version 1.1
Vehicle Editor
User-defined conventional tugs could not be used in airplane combinations.
Combo box controls could, under certain circumstances, become unusable.
Regression in version 1.1
Design Path
Helicopter rotor swept surface offsets were not correctly handled (values were halved by the program).
Regression in version 1.1
Swept wing surfaces could, under certain circumstances, include a notch at the end of a turn.
[A] The Follow function now supports elliptical arcs (must have the same major and minor axis length).
Park Object
The dialog was displayed incorrectly on Japanese versions of Windows®.
Regression in version 1.1
Session Manager
The session tree structure/list could be corrupted by adding a new folder.
Selecting more than one session could result in empty element lines.
Licensing
[M] A license error at start-up could, under certain circumstances, cause the program to crash.
Migration
Some AeroTURN simulations caused AviPLAN to freeze during migration.
The layer/level for AeroTURN simulations was not preserved after migration.
1.1
Software Upgrade | Released 17 June 2016
Includes new CAD platform compatibility, new functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 15 June 2016.
New/Improved functionality
CAD platform compatibility
Autodesk AutoCAD® 2017
Bentley MicroStation® CONNECT Edition
Bricsys BricsCAD® V16
Select Object
A status row has been added to highlight how many objects are shown, selected, hidden by filters, etc.
Library updates
Library updates can be deployed to workstations in a network using the network server's shared data folder.
Migration
Drawings containing PathPlanner A5 data can now be migrated.
AeroTURN simulations with a generic pushback tractor can now be migrated.
Corrected functionality
MicroStation
AviPLAN did not load in some MicroStation versions.
Regression in version 1.0.1
Migration
PathPlanner 6.XY path sessions containing trucks could cause a migration system error.
PathPlanner 6.XY sessions could not be migrated if graphic elements had been deleted from the drawing.
PathPlanner 6.XY path sessions containing pushbacks could incorrectly display a migration system error, even if the session was successfully migrated.
User interface
Some menu and dialog fonts were not displayed correctly.
Regression in version 1.0.1
1.0.1
Software Update | Released 23 March 2016
Includes improved functionality, increased performance and bug fixes.
Requires an active Maintenance Assurance Program (MAP) subscription on 21 October 2016.
Note: Drawings written by this version cannot be opened with previous versions!
New/Improved functionality
Design Path
The full range of display elements is available for all aircraft along a path.
The 'Follow' drive mode algorithm has been refined to improve usability.
Corrected functionality
General
A number of stability issues were identified that could impact overall performance.
Design Path
It was not always possible to follow CAD elements in reference drawings.
Paths containing one or more 'Follow' segments were, under certain conditions, not correctly redrawn when the object was switched.
Session Manager
Clearance boxes for DC 10-30 airplanes were drawn incorrectly.
License handling
A system error occurred when launching the program if all network license seats were in use.