Platform Compatibility
System Requirements
Workstation: Windows® Vista SP2, Windows 7 SP1, Windows 8/8.1, Windows 10
Server: Windows® Server 2008, 2008 R2, 2012, 2012 R2, 2016
Platform Requirements
Autodesk® AutoCAD® 2010 – 2019 (except AutoCAD LT)
Autodesk® Civil 3D® 2010 – 2019
Bentley® MicroStation® V8i, CONNECT Edition
Bentley® MicroStation PowerDraft® V8i, CONNECT Edition
Bentley® PowerCivil® V8i
Bentley® Power GEOPAK® V8i
Bricsys® BricsCAD® (Pro and Platinum) V14 – V18
New/Improved functionality
CAD platform compatibility
Autodesk AutoCAD® 2019
Autodesk Civil 3D® 2019
Design Path
Algorithm improvements have been made to improve the usability of the Follow function.
Design Fillet
The 'Design Fillet' command has been overhauled, with a new User Interface (UI) and extended functionality.
Entries can now be placed on arc elements with a radius greater than 100 meters/330 feet.
Code/Group can now be set for each individual intersection entry.
Entries can now be placed on multiple centerline layers.
A filter control has been added to include/exclude airplanes based on taxiway categorization.
Support has been added for selecting airplanes using Groups (defined using Group Manager).
Algorithm improvements have been made to improve calculation and drawing times.
A new Fillet Results dialog publishes a list of the most demanding airplanes in the session.
A range of reports can now be generated, including .odt (Word®), .csv (Excel®) and drawing block (CAD).
Session Manager
The 2D/3D setting can now be changed for multiple sessions simultaneously.
Session layer can now be assigned for multiple sessions simultaneously.
Property templates can now be assigned for multiple sessions simultaneously.
Property template support has been added for Design Fillet sessions.
2D/3D airplanes can now be displayed along a route for Design Fillet sessions.
Objects that are 2D-only can be shown/controlled when a Park session is visualized in 3D.
Objects that are 2D-only can be shown/controlled when a Path session is visualized in 3D.
A new element has been added for visualizing the 'Engine, inner' path for 4-engine airplanes.
Service Editor
A new 'Service Editor' command has been introduced for creating customized airplane service arrangements.
Vehicle Editor
A new mandatory control has been added under General to define vehicle Type.
Installation
Silent installation is now supported for Standalone/Single User license installations.
Corrected/Changed functionality
Design Path
The Follow function occasionally generated large circles to reach the selected target point.
Following 'joined' line elements could, under certain circumstance, cause a system error.
Design Fillet
Categorizing a taxiway as ICAO Code C erroneously displayed the taxiway (straight portion) width as 14 meters.
The 'Fillet edge, calculated' output was not generated in accordance with FAA AC 150/5300-13A Change 1.
Session Manager
The FAA ADG III Taxilane Wingtip Clearance value was set by default to 22 feet.
A system error could occur when applying a template with the 80km/h / 35mph Idle thrust impact surface.
Service Arrangement display settings were not retained when reopening sessions.
General
[A] A system error could occur when selecting AviPLAN elements in an AutoCAD drawing after a library update.
Jet blast impact surface boundary lines were jagged, under certain circumstances.
Numerous miscellaneous system error/bug reports submitted via the AviPLAN Error Report tool.